Skip to content

The homeowner library

AC Replacement Cost in DFW: 2026 Prices by System Size

Compare complete gas + AC replacement from $8,704.50, heat pumps from $8,957, and AC-only options. See installed scope and local project stories.

A complete gas furnace + AC replacement from Varsity Zone of Frisco currently ranges from $8,704.50 to $14,717.40 for one 2–5-ton system, depending on capacity and equipment tier. These are our published installed estimates, not a claimed DFW-wide average. The assessment confirms the matched equipment, installation scope and final written quote.

Already have a proposal? Have us review your quote, or get a free replacement appointment. You can also text your questions to (469) 423-9363.

First, compare the same kind of replacement

“New AC” can describe very different work. A price for an outdoor unit alone is not comparable to a complete heating and cooling system.

  • Complete gas furnace + AC: a gas furnace, outdoor condenser and matched indoor coil, with standard installation. The tables below use this scope.
  • AC-only: a single-stage condenser and coil while retaining a compatible furnace or blower. A 2-ton option starts at $7,480.25; condition and compatibility need to be checked.
  • Heat pump + air handler: a matched electric heating and cooling system. Our published options start at $8,957. See heat pump options.
  • Furnace-only, dual-fuel or unusual configurations: request a specific assessment. A full-system estimate is not a furnace-only price.

AC-only, full HVAC system or heat pump: installed cost by size

These are single-stage estimates for one system. Each column describes a different project; the full-system column includes a new gas furnace, while AC-and-coil pricing assumes a compatible furnace or blower stays in place.

CapacityAC + coil, keeping a compatible furnaceGas furnace + AC + coilHeat pump + air handler
2 ton$7,480.25$8,704.50$8,957
3 ton$7,810.25$9,181$9,300.75
4 ton$8,339.63$9,298.44$10,448.88
5 ton$8,686.13$10,157$10,972.75

What does a 3-ton AC replacement cost?

For the same 3-ton capacity, our published single-stage estimate is $7,810.25 for AC + coil, or $9,181 with a new gas furnace included. A complete 3-ton inverter gas + AC option is $9,941.20. These are installed contractor estimates, not regional averages or a recommendation for your home's capacity.

Ask about the 3-ton complete system or the 3-ton AC-and-coil option. You can leave your information first; choosing an appointment time is optional.

Complete-system prices by tonnage

These figures are for one gas furnace + AC system. Equipment availability, the exact matched combination and work required at your address are confirmed before installation.

System sizeGood: single-stageBetter: inverterBest: premium inverter
2 ton$8,704.50$9,651.30$12,600
3 ton$9,181$9,941.20$13,517.50
4 ton$9,298.44$10,640.60$14,317
5 ton$10,157$11,245.10$14,717.40

Do not choose tonnage from this table alone. The home’s cooling load, ducts and equipment match matter. A square-footage calculator is a planning estimate, not a completed load calculation. Half-ton combinations require confirmation.

Find an initial estimate for your home or request a written installed quote.

What changes the final quote?

Your written proposal should identify the equipment models and capacity, installation labor, removal of the old equipment, controls, permit responsibilities and warranty terms. Ask what is included before comparing totals.

Ask for the total for your address, not just an equipment-only price. Keep the base installation and any additional work separate in the proposal.

Existing conditions can add work: duct repairs or replacement, electrical changes, equipment relocation, difficult access, a new line set, drain work or upgraded controls. These items should be identified and priced before you approve them. Do not assume every project needs every upgrade.

How can I compare two replacement quotes fairly?

  1. Match the project. AC-and-coil, furnace + AC, and heat pump + air handler are different scopes. Confirm which existing equipment stays.
  2. Match the equipment. Compare capacity, model numbers, indoor/outdoor compatibility and the rated efficiency of the proposed combination.
  3. List installation work. Identify removal, controls, permit responsibilities and any duct, electrical or access work. Ask what could change the total.
  4. Compare protection. Read parts and labor coverage separately, along with registration, maintenance and exclusions. Keep the satisfaction guarantee's written terms with the proposal.
  5. Compare the final price. If financing is offered, review the APR, term and total payments as well as the monthly amount.

For independent information about equipment sizing and duct evaluation, see ENERGY STAR's HVAC installation guidance. For a practical side-by-side worksheet, use our AC quote comparison guide.

Is an inverter worth the extra cost?

Single-stage equipment operates at its designed output when running. An inverter system can vary compressor output within its operating range. For the homeowner, the decision is about comfort, sound, efficiency, the equipment match and the upgrade price—not a guaranteed percentage reduction in the electric bill.

Our inverter versus single-stage guide explains the operation visually. Use the cooling-savings worksheet to explore your own electricity and usage assumptions.

What real local replacements looked like

Frisco: two single-stage systems. Dustin L. and his family bought an older home and replaced both systems. Each installation included a 10-year parts-and-labor warranty and a 1-year satisfaction guarantee. Read Dustin’s project story and linked review.

Prosper: an inverter after a failure. Frank C.’s roughly 20-year-old system failed. The team assessed it that afternoon and he chose an inverter system. Read Frank’s project story and linked review.

The business owner reports lower electric bills after both projects. These are reported experiences, not independently measured savings. We have not published their invoice amounts or attributed stock photos to their homes.

What protection comes with the installation?

Varsity Zone of Frisco installations include 10-year parts-and-labor coverage and a 1-year satisfaction guarantee, subject to the written terms. Ask how registration, maintenance, exclusions and the claim process apply to your equipment. A parts warranty and labor warranty cover different things; compare both.

Repair, replace one system, or replace both?

Start with the diagnosis and a written repair estimate. An older system does not automatically need replacement, and one failed system does not establish that another must be replaced. Compare current repair cost, condition, remaining coverage, comfort and the full replacement scope. Our repair-or-replace worksheet lets you compare your own numbers.

Local prices and the next step

Explore Frisco, Plano, Prosper, Celina, Little Elm and The Colony. The booking page checks ZIP coverage and the team confirms the address; this regional guide does not promise service to every DFW location.

Get my free replacement appointment · Have us review my quote

How we prepared these prices

Pricing reviewed October 13, 2026 against the owner’s VZ Pricebook and confirmed corrections. Tables are generated from the same public catalog as the website calculator. It is not an independent contractor-rating service. Read about our editorial process.

Your local team · Varsity Zone of Frisco

Get your home’s replacement plan in writing.

Your free appointment with Varsity Zone of Frisco covers equipment options, installation scope, price and written protection. You decide what works for you.

Put what you’ve learned to work.