Live Pricing · Updated March 2026
Real installed prices for Richardson homeowners — from $9,440. No sales pitch, no hidden fees, no email required.
No email. No phone number. Just your price.
Avg Home Size
1,600–3,200 sq ft
Typical System
2.5–4 ton
Homes Built
1960–2015
Installed with warranty. Price shown = price you pay.
AC System
Gas furnace + AC condenser
from $9,440
installed w/ warranty
Heat Pump
Dual-fuel heat pump system
from $12,003
installed w/ warranty
All-Electric
No gas line required
from $9,440
installed w/ warranty
Richardson has some of the oldest residential housing stock in the DFW suburban ring. Neighborhoods like Prairie Creek, Heights Park, and central Richardson south of Arapaho Road contain homes built in the 1960s–1980s — meaning original ductwork is 40–60+ years old and virtually always needs replacement alongside the AC system. This is the single biggest cost variable for Richardson homeowners: a duct replacement adds $2,000–$5,000 to the project but is absolutely necessary for a new system to perform correctly.
The flip side is that Richardson homes are often smaller than newer DFW suburbs, which means the equipment itself costs less. A typical 1,600–2,200 sq ft Richardson ranch home needs a 2.5–3 ton system — starting at the base of our pricing range. Even with ductwork replacement included, total project costs in Richardson are often competitive with larger homes in newer cities that don't need duct work.
Richardson's Telecom Corridor along US-75 has brought massive redevelopment (CityLine, Palisades) that's increased property values across the city. If you're in an older Richardson home, upgrading to a modern high-efficiency system isn't just about comfort — it's protecting a home that's appreciating faster than it has in decades.
The City of Richardson requires permits for HVAC replacement and has one of the more experienced building departments in DFW. Their inspectors know residential HVAC inside and out. Our pricing includes all permits and inspections.
HVAC replacement costs and considerations vary by neighborhood. Here's what to expect in the most common Richardson communities:
Canyon Creek
Upscale established community (1985–2005), 2,500–4,000 sq ft. Mix of first and second replacement cycles. Well-maintained homes with good documentation.
Prairie Creek / Heights Park
Classic 1960s–1980s ranch homes, 1,200–2,000 sq ft. Oldest housing stock in Richardson — ductwork almost certainly needs replacement alongside the AC.
Breckinridge Park
Mixed 1970s–1990s homes, 1,800–2,800 sq ft. Many on R-22 systems that are expensive to repair.
CityLine area
Newer mixed-use development with modern apartments and townhomes. Most systems still under warranty.
Spring Valley / Campbell area
1970s–1980s homes, 1,500–2,400 sq ft. Smaller systems at lower price points.
Financing Available for Richardson Homeowners
8.99% APR · 12 year terms · As low as $114/mo per $10,000
No prepayment penalties. Apply during your free assessment.
No email. No phone number. Just your price.
A complete AC replacement in Richardson costs between $9,440 and $18,545 installed in 2026, depending on system type (AC, heat pump, or all-electric), tonnage (2–5 tons), and efficiency tier (Economy, Performance, or Premium). Every price includes the full system, labor, materials, permits, and 10-year warranty.
Every installation includes the new outdoor unit (condenser or heat pump), indoor unit (furnace or air handler), evaporator coil, copper line set, concrete pad, Ecobee smart thermostat, all ductwork connections, permit and city inspection, old system removal, and a 10-year parts and labor warranty.
A standard HVAC replacement takes one day — typically 6–8 hours from start to finish. Your new system will be running the same day. Complex multi-zone installations may extend to a second day.
Yes. We offer 8.99% APR financing over 12 years, bringing monthly payments to approximately $114 per $10,000 financed. No prepayment penalties. Apply during your free assessment.
System sizing depends on your home's square footage, insulation quality, number of stories, window area, duct condition, and sun exposure. Most Richardson homes (1,600–3,200 sq ft) need a 2.5–4 ton ton system. We perform a full load calculation on every job to ensure proper sizing — not just a guess based on square footage.
Spring (March–May) and fall (October–November) offer the best combination of comfortable weather and contractor availability. Summer emergency replacements typically cost 20–30% more due to demand and urgency. If you know your system is aging, plan ahead and replace before it fails in July.
For a typical 1,600–2,200 sq ft Richardson ranch home, ductwork replacement runs $2,500–$4,000. Larger homes or homes with complex layouts can reach $5,000. We inspect every system and only recommend duct replacement when it's truly needed — crushed sections, disconnected runs, or deteriorated insulation. If your ductwork is intact, we'll seal it and leave it alone.
Absolutely. Richardson home values have risen significantly due to CityLine development and UTD growth. A modern HVAC system protects that investment, reduces your electricity bill by 30–40% compared to a 20+ year old system, and makes the home more competitive if you sell. The ROI on HVAC replacement in Richardson is among the best in DFW right now.
Every Richardson installation is handled by Varsity Zone HVAC — licensed, insured, and serving the Dallas–Fort Worth metroplex. We're not a lead generation service that sells your info to four contractors. We're the contractor. One company, one price, one point of contact from quote to installation to warranty service.
Our pricing is transparent because we believe you deserve to know what you're paying before anyone shows up at your door. No "free estimates" that turn into high-pressure sales pitches. No bait-and-switch pricing. See your real price online in 30 seconds.
30 seconds. No personal info required.
Service Areas
Installed by Varsity Zone HVAC · Licensed · Insured · Serving Richardson and 34 North Texas cities · © 2026 DFW Air Cost